Epoxy
Pipe Rehabilitation
Without Excavation
Trenchless pipe rehabilitation using spray-lining and brush-coating. Nodig ProLight, ProLight2 and BSE systems restore corroded pipes from the inside — DN40 to DN150, lifespan 50+ years.
Nodig Coating Systems
Three systems for spray-lining and brush-coating — from compact residential to full industrial rehabilitation.
ProLight
Single-press spray-lining and brush-coating. Compact and precise.
RangeDN40–DN125
MethodSpray + Brush
PressSingle-press
ProLight2
Double-press system — more coverage, larger diameters.
RangeDN40–DN150
MethodSpray + Brush
PressDouble-press
BSE Epoxy
Two-component brush-and-spray epoxy. Structural rehabilitation.
MethodBrush + Spray
Epoxy2-component
The Rehabilitation Process
Four steps from dirty pipe to fully rehabilitated lining — no digging required.
1
Inspect
Camera inspection to assess pipe condition, identify damage and confirm suitability for lining.
2
Clean
High-speed mechanical cleaning (V8/V1/Mini6) to remove all deposits and create the adhesion profile.
3
Coat
ProLight or BSE applies two-component epoxy evenly to the pipe wall — spray-lining or brush-coating.
4
Cure & Verify
Epoxy cures in place. Final camera inspection verifies the coating is uniform and the pipe is restored.
Why Choose Trenchless Epoxy
Up to 50% cost saving
No excavation means no road reinstatement, no landscape restoration, no heavy machinery costs.
Days, not weeks
A typical residential pipe can be cleaned and coated in a single working day.
50+ year lifespan
BSE two-component epoxy coatings are specified for structural integrity over 50 years.
Minimal disruption
No open trenches, no surface damage, no vibration — neighbours and traffic are unaffected.
Seals and strengthens
Epoxy seals cracks, stops corrosion and restores structural strength from the inside.
Certifiable quality
Consistent epoxy application can be verified by final camera inspection and coating thickness measurement.
Epoxy Rehab vs. Other Approaches
| Criterion | Epoxy (No-Dig) | Full Pipe Replacement | CIPP Lining |
|---|---|---|---|
| Excavation required | ✓ None | ✗ Full trench | ✓ Minimal |
| Cost | ✓ Low–Medium | ✗ Very High | Medium–High |
| Speed | ✓ 1 day typical | ✗ Weeks | Days |
| Small-diameter DN40–DN100 | ✓ Ideal | Possible | ✗ Difficult |
| Corrosion protection | ✓ Full seal | ✓ New pipe | ✓ Yes |
| Surface disruption | ✓ None | ✗ Major | Minor |
FAQ
Epoxy Rehab Questions
Common questions about spray-lining, brush-coating and BSE epoxy rehabilitation.
Trenchless epoxy rehabilitation restores old or corroded pipes from the inside — no excavation required. Two-component epoxy is applied to the pipe wall by spray or brush, creating a new structural inner lining with 50+ year lifespan.
Yes — always. High-speed chain cleaning (V8/V1/Mini6) must be performed first to remove all deposits and create the surface profile for epoxy adhesion. Applying epoxy to an unprepared surface will not produce a lasting result.
DN40–DN125 with ProLight (single-press), DN40–DN150 with ProLight2 (double-press). BSE epoxy covers a similar range. Contact us for exact suitability assessment.
BSE two-component epoxy is specified for a service life of 50+ years when applied correctly to a properly prepared surface.
Yes — the full catalogue includes epoxy hoses, spray heads, brushes, coating materials and accessories. See our epoxy materials and coating systems pages.
Ready to Rehabilitate Trenchlessly?
Tell us your pipe diameter, material and condition — we will recommend the right system and send a quote.