High-Speed
Pipe Cleaning
Machines
Professional mechanical chain-driven pipe cleaning for DN32–DN150+. Nodig V8, V1 and Mini6 — removing scale, roots, grease and corrosion where water jetting reaches its limits.
Why Mechanical Cleaning
When Water Jetting
When Water Jetting
Isn't Enough
⛓️
Hard mineral deposits
Scale, lime and concrete residue require physical abrasion — chains at high speed achieve what water pressure cannot.
🌿
Root intrusion
Roots that have grown into the pipe are cut and removed cleanly, restoring full bore diameter.
🔧
Surface preparation
Before applying epoxy (BSE or ProLight), the pipe surface must be mechanically prepared. Chains create the required adhesion profile.
📐
Precise diameter control
Different chain tools for different pipe sizes — full control from DN32 up to DN150+ without over-treating.
Advantages vs. Water Jetting
✓ Works without water connection or pressure equipment
✓ Removes hard deposits water cannot break up
✓ Creates the surface profile needed for epoxy adhesion
✓ Compact — one person, one machine, one power outlet
✓ No wastewater disposal required
✓ Battery-powered options for trenchless work
Nodig Machine Range
Three machines covering DN32 to DN150+ — from compact residential to heavy-duty industrial cleaning.
V8
Heavy-duty professional. Chain-driven, DeWalt FlexVolt.
CableØ8 mm · 18 m
RangeDN50–DN150+
DriveDeWalt FlexVolt
UseMunicipal / Industrial
V1
Compact professional. Dual 18V battery.
CableØ6 mm · 20 m
RangeDN32–DN100
Drive2× 18V/5Ah
UseResidential / Commercial
Mini6
Lightweight and fast. Ideal for small diameters.
CableØ6 mm · 10 m
RangeDN32–DN75
Drive18V/5Ah
UseResidential / Tight access
Where Nodig Machines Work
From residential properties to municipal networks — mechanical cleaning covers the full range.
01
Blocked drains
Fat, soap, mineral scale and organic blockages removed without chemicals.
02
Root removal
Chain tools cut and remove root intrusions from DN50 to DN150+.
03
Pre-epoxy prep
Creates the surface profile required for BSE epoxy and ProLight brush coating to adhere properly.
04
Municipal sewers
V8 handles demanding municipal work — heavy deposits, large diameters, high-cycle use.
05
Industrial pipes
Process pipes, cooling lines and drainage systems in factories and commercial premises.
06
Renovation prep
Clear and inspect pipes before renovation — avoid costly surprises and ensure the lining system bonds correctly.
Mechanical vs. Other Methods
| Criterion | High-Speed Mechanical | Water Jetting | Chemical |
|---|---|---|---|
| Hard mineral deposits | ✓ Excellent | ✗ Limited | ✗ Slow |
| Root intrusion | ✓ Cuts clean | ✗ Pushes only | ✗ Not effective |
| Surface prep for epoxy | ✓ Required | ✗ Not suitable | ✗ Not suitable |
| Water connection needed | ✓ None | ✗ Yes (pressure) | Rinsing only |
| Waste disposal | ✓ Minimal | ✗ Wastewater | ✗ Chemical waste |
| One-person operation | ✓ Yes | 2 persons typical | ✓ Yes |
FAQ
Technical Questions
Everything you need to know about high-speed mechanical pipe cleaning machines.
Motor-driven chains rotating at high speed inside a pipe physically cut and remove deposits — mineral scale, roots, grease, corrosion. Unlike water jetting, the chains mechanically abrade material from the pipe wall.
For DN50–DN150, the V8 High-Speed is the primary recommendation. For smaller dimensions (DN32–DN100), V1 or Mini6 are typically the right choice.
Yes. Chain cleaning removes deposits and creates the surface roughness required for BSE two-component epoxy to adhere correctly. It is the mandatory pre-treatment step before ProLight or BSE application.
Yes. We are the official Nodig distributor for Germany and deliver nationwide. Contact us at info@nodig-shop.de for availability and a quote.
Usually the same or next business day. Send us your application area and pipe dimensions and we will get back to you promptly.
Ready to Discuss the Right Machine?
We will help you select the correct model for your pipe diameters and application. Same-day response.